You can use the Multi-access stand with your current Pen Display 24.
You will need to remove the four screws that secure the Tilt stand to the back of your Pen Display 24. Once you do that, you can then connect the Multi-access Stand Cable Hub to the back of the Pen Display 24. You will need to follow the Guide to ensure you have routed the cables through the Hub first.
Once you have done that, you can lift and place the Pen Display 24 onto the stand.
[1] The Cable Hub is shown inserted into the stand. You can see the four mounting screws holes. [2] The Multi-access Stand. [3] The tilt release and handle. |  |
[4] This shows the back of the Cable hub. The power and video/USB cables will need to pass through this opening and connect to the ports on the Pen Display 24. [5] Tilt release and handle. |  |
If you would like to contact Customer Care for assistance with mounting the Multi-access stand to your Pen Display24, you can email them at [email protected].
